Sliding Doors that seal, another innovative product from Danica. Providing all the space saving benefits that sliding doors offer, they adhere to the most rigorous standards for contamination control for dividing environments. Its construction characteristics, with a silicon sealing section around all its perimeter, meets GMP requirements and the rigid standards required by the FDA and ANVISA.
Guarantee of Safety For Clean Rooms
General characteristics:
- Internal insulation in PUR (polyurethane), PIR (polyisocyanurate) or LDR (rock wool);
- Standard leaf thickness 50mm / 0.16 feet;
- Leaf and stop clad with galvanized flat steel plate 0.5mm / 0.00164 feet, pre-painted in standard white color RAL 9003 (other colors on consultation) or
0.8mm / 0.00262 feet thick stainless steel;
- Stop made from sheet has rounded corners (no harp edges), facilitating cleaning;
- Hardware made from aluminum and stainless steel;
- Screws and washers for fixing accessories made from stainless steel AISI 304;
- Support pulleys made from nylon with embedded bearings, guaranteeing perfect operation without any noise or friction;
- Key system with stainless steel supports and sloping surfaces to hinder the buildup of residues;
- Optional interlocking system;
- Available in the options: panel, panel-window or window.
- Standard Sizes (mm/feet):
1000 x 2100mm / 3.28 x 6.88 feet
1600 x 2100mm / 5.24 x 6.88 feet
2000 x 2200mm / 6.56 x 7.21 feet
| Air Leak through door/stop (m3/h) |
| 5 Ppa |
7.5 Pa |
10 Pa |
12.5 Pa |
15 Pa |
20 Pa |
| 11 |
15 |
19 |
23 |
27 |
34 |
Discover the product differential:
Sealing Section
Front and lower Sealing sections manufactured from round format white silicon (RAL 9003) with the purpose of minimizing the accumulation of dirt and impurities offering a good seal between the two environments.
Lower Guide
The use of the Lower guides is designed to ease the opening of the door and provides a good seal, because the door is pressed against the wall and the floor.
|
